Layers

 

 

Layers

The Layers function is designed to draw model layers on a cross-section.

 

Layer elevation data may be entered as either comma-delimited or using the standard FEFLOW format.  Comma-delimited data is entered as X-Y-Z values followed by a layer number.  Unit names are entered in a separate file, with one name per layer.  There should be one less unit than the maximum layer number in the layer elevation file. 

 

Query

 

 

Format

Interpolation

This tab allows the user to select the interpolation scheme and the parameters of the interpolation method.  The correct selection of interpolation parameters is critical for generation of contours that accurately reflect the field data and our expectations of how the values vary between the measured data points.  The default parameters are frequently adequate, although some improvement can be anticipated through trial and error. 

 

Kriging Parameter

The kriging routines are derived from the kt3d routine of the Geostatistical Software Library (GSLIB) authored by Clayton Deutsch and Andre Journel (www.gslib.com). 

The reference, GSLIB: Geostatistical Software Library and Users' Guide is highly recommended.  Here are the spherical semivariogram models used by EnviroInsite for an isotropic system, where h is the lag, c is the sill, and a is the (practical) range.  This is from this link to an introductory text on kriging:  Click here for an introductory text on the variogram models

For anisotropic systems h/a in the previous is calculated as

 

Hatch